بازیافت برادههای فولاد Ck45 با سینترینگ پلاسمای جرقهای: مقایسه با ماشینکاری سنتی و ارزیابی محیطزیستی
الموضوعات : مدیریت و تکنولوژی مواد زائدسیدمحمدرضا سده ئی 1 , زهرا ملکی 2 , فاطمه نوروزی پالنگانی 3 , احمدرضا رستگار 4 , محمد خاکپور 5
1 - دانشجوی دکتری، دانشکده مهندسی مکانیک، دانشکدگان فنی، دانشگاه تهران، تهران، ایران
2 - دانشکده مهندسی، گروه مهندسی صنایع، مجتمع آموزش عالی گناباد، گناباد، ایران
3 - دانشجوی کارشناسیارشد، دانشکده مهندسی مواد، دانشگاه صنعتی امیرکبیر، تهران، ایران
4 - دانشجوی کارشناسی، دانشکده علوم اداری و اقتصادی، دانشگاه فردوسی، مشهد، ایران
5 - مجتمع ماشین سازی فدک، گناباد، ایران
الکلمات المفتاحية: فولاد, محیطزیست, بازیافت, ماشینکاری, براده, سینترینگ پلاسمای جرقهای,
ملخص المقالة :
رویکردهای پایدار در بازیافت مواد، کلیدی برای کاهش اثرات زیست محیطی فرایندهای تولید بهشمار میآیند. در این پژوهش، از برادههای تولید شده در ماشینکاری بهعنوان منبعی ارزشمند برای بازیافت استفاده شده است، که نهتنها کاهش پسماند، بلکه دستیابی به فرایندهای تولید مقرونبهصرفهتر و سازگار با محیطزیست را ممکن میسازد. از این طریق، تولید پودر برای روشهای نوین ساخت مانند سینترینگ پلاسمای جرقهای بهعنوان جایگزینی کارآمد و دوستدار محیطزیست برای روشهای سنتی ماشینکاری معرفی شده است. در این تحقیق با استفاده از فولاد CK45، چرخهای بسته برای بازیافت مواد ایجاد شدهاست، که در آن برادههای ماشینکاری مجدداً به نمونهای با لک تبدیل و قطعات تحت آزمونهای، سختیسنجی و تحلیل XRD قرار گرفتهاند. نتایج نشان میدهد که روش مبتنی بر بازیافت و متالورژی پودر نهتنها خواص مکانیکی برجستهای نظیر افزایش 30 واحدی سختی را ارائه میدهند بلکه نسبت به ماشینکاری سنتی، ضمن کاهش مخاطرات محیطزیستی، امکان تولید قطعاتی با ویژگیهای پیشرفته را فراهم میآورد. این دستاوردها چشماندازی جدید برای صنایع حساسی، مانند هوافضا و خودرو ارائه میدهد، که در آن کاهش اثرات محیطزیستی و افزایش کارایی، همگام با توسعه فناوریهای پایدار محقق میشود.
Al-Saadi, T. M., Mustafa, H. J., & Mahdi, H. I. (2026, March). Nano-zinc ferrite prepared by auto combustion method: Estimating crystallite size and microstrain using Williamson–Hall analysis. In AIP Conference Proceedings (Vol. 3396, No. 1, p. 070016). AIP Publishing LLC.
Altınbay, A., & Doğu, M. (2026). Recycling of Carbon Fiber/Poly (Ether Ether Ketone) Composite's Milling Dust/Chips. Polymer Composites.
Ashar, T., Zhang, Y., Yang, C., Xu, W., Zeeshan Ul Haq, M., Tahir, H., ... & Wu, Z. (2025). Rubber intercropping with arboreal and herbaceous species alleviated the global warming potential through the reduction of soil greenhouse gas emissions. Scientific Reports, 15(1), 3196.
Bank, W. (2021). The World Bank annual report 2021: from crisis to green, resilient, and inclusive recovery. The World Bank.
Beck, S. C., Williamson, C. J., Kinser, R. P., Rutherford, B. A., Williams, M. B., Phillips, B. J., ... & Jordon, J. B. (2023). Examination of microstructure and mechanical properties of direct additive recycling for Al-Mg-Mn alloy Machine chip waste. Materials & Design, 228, 111733.
Bhatta, G., Valladares, L. D. L. S., Liu, X., Ma, Z., Domínguez, A. B., Moreno, N. O., ... & Zhang, D. (2021). Microstructure and mechanical properties of solid state recycled 4Cr5MoSiV (H11) steel prepared by powder metallurgy. Results in Materials, 10, 100184.
Corre, T., Perrin, J., Gebhard, J., Duchateau, T., Lilensten, L., Laurent-Brocq, M., ... & Huneau, B. (2026). Tensile and shear behavior of recycled AA 6060 aluminium chips by direct hot extrusion. Materials Science and Technology, 42(1), 61-67.
Dhanasekaran, S., & Gnanamoorthy, R. (2007). Abrasive wear behavior of sintered steels prepared with MoS2 addition. Wear, 262(5-6), 617-623.
Dudina, D. V., Bokhonov, B. B., & Olevsky, E. A. (2019). Fabrication of porous materials by spark plasma sintering: A review. Materials, 12(3), 541.
Elsheikh, A., Ali, A. B., Saba, A., Faqeha, H., Alsaati, A. A., Maghfuri, A. M., ... & Ma, N. (2024). A review on sustainable machining: Technological advancements, health and safety considerations, and related environmental impacts. Results in Engineering, 24, 103042.
Emami, S., Buffa, G., Latif, A., Stornelli, G., Di Schino, A., Särnerblom, B., ... & Fratini, L. (2026). Insights into the microstructure evolution and micromechanical properties of Friction Stir Consolidated AA6082 aluminum chips. Journal of Materials Research and Technology.
Fan, K. C., Chen, S. H., Chen, J. Y., & Liao, W. B. (2010). Development of auto defect classification system on porosity powder metallurgy products. NDT & E International, 43(6), 451-460.
Hosseinnejad, A., Saboohi, Y., Zarei, G., & Shayegan, J. (2023). Developing an integrated model for allocating resources and assessing technologies based on the watergy optimal point (water-energy nexus), case study: a greenhouse. Journal of Sustainable Development of Energy, Water and Environment Systems, 11(1), 1-32.
Huang, X., Zheng, W., Li, Y., Li, C., Li, Y. E., Zhang, N., ... & Ye, J. (2025). Ozone formation in a representative urban environment: model discrepancies and critical roles of oxygenated volatile organic compounds. Environmental Science & Technology Letters, 12(3), 297-304.
IEA, P. (2022). World energy outlook 2022. Paris, France: International Energy Agency (IEA), 17.
Ma, X., He, Q., Zhang, L., Wu, W., & Li, W. (2025). Forecasting fossil fuel consumption and greenhouse gas emissions using novel multi-variable grey system model with convolution integrals. Energy, 326, 135981.
Madansure, Y. S., Gurav, S. K., Balsure, S. D., Gaikwad, P. K., Imran, A., El-Toni, A. M., ... & Kadam, R. H. (2026). X-ray diffraction analysis by Williamson-Hall, strain-size, Halder-Wagner, and Nelson–Riley methods, and its co-relationship with elastic and magnetic properties of Ce3+ substituted Fe-rich cobalt ferrite. Journal of Materials Science: Materials in Electronics, 37(10), 706.
Madej, M., & Leszczyńska-Madej, B. (2026). Carbide-controlled surface engineering of Cantor-type high-entropy alloys during FAST/SPS processing. Journal of Alloys and Compounds, 1057, 186936.
Maohua, X., Wang, W., Xiaojie, S., Zhu, Y., Petr, B., & Yilidaer, Y. (2021). Research on defect detection method of powder metallurgy gear based on machine vision. Machine Vision and Applications, 32(2).
Mirbolooki, H., ABEDINZADEH, N., & GHANBARI, F. (2018). Environmental impact assessment of steel plant construction.
Puleo, R., Latif, A., Ingarao, G., Di Lorenzo, R., & Fratini, L. (2023). Solid bonding criteria design for aluminum chips recycling through Friction Stir Consolidation. Journal of Materials Processing Technology, 319, 118080.
Rubach, R., Figiel, P., Biedunkiewicz, A., Pawlyta, M., & Garbiec, D. (2026). Effect of Mo content in the Ti₁₋ ₓMoₓC reinforcing phase on the microstructural, mechanical, tribological and corrosion behavior of titanium matrix composites sintered by the FAST/SPS process. Archives of Civil and Mechanical Engineering, 26(2), 56.
Santos, R. F., Farinha, A. R., Rocha, R., Batista, C., Rodrigues, G. C., & Vieira, M. T. (2021). High-speed machining tool-steel chips as an outstanding raw material for indirect additive manufacturing. Results in Materials, 11, 100207.
Sedehi, S. M. R., Khosravi, M., & Yaghoubinezhad, Y. (2021). Mechanical properties and microstructures of reduced graphene oxide reinforced titanium matrix composites produced by spark plasma sintering and simple shear extrusion. Ceramics International, 47(23), 33180-33190.
Shao, M., Lu, S., Liu, Y., Xie, X., Chang, C., Huang, S., & Chen, Z. (2009). Volatile organic compounds measured in summer in Beijing and their role in ground‐level ozone formation. Journal of Geophysical Research: Atmospheres, 114(D2).
Shiri, Z. G., Zhang, C., Contreras, J. R., & Chandran, K. R. (2026). Designing and SPS Processing of Niobium Alloys in the Nb-Hf-Ti-B System: New Alloys with Low Density, High Strength and Toughness. Journal of Alloys and Compounds, 188052.
Shone, R. M. (1947). The Iron and Steel Development Plan: Some Statistical Considerations. Journal of the Royal Statistical Society, 110(4), 283-309.
Shukla, P. R., Skeg, J., Buendia, E. C., Masson-Delmotte, V., Pörtner, H. O., Roberts, D. C., ... & Malley, J. (2019). Climate Change and Land: an IPCC special report on climate change, desertification, land degradation, sustainable land management, food security, and greenhouse gas fluxes in terrestrial ecosystems.
Zhang, W., Liu, Y., & Li, D. (2019). Chemical Pollution in Industrial Processes and Its Impact on the Environment. Environmental Science & Technology, 53(5), 1234-1242.
Zioual, S., Khelfaoui, Y., Amari, D., Abdelli, S., & Djermoune, A. (2026). Mechanical and Microstructural Characterization of a Titanium-based Ti-6Al-2Cr-2Ni Alloy Produced by SPS Sintering for Use in the Aerospace Industry. Periodica Polytechnica Mechanical Engineering, 70(1), 17-24.
